dmesg - GALAX NVIDIA GeForce GTX 960 2GB Upgrade GpuTest Redo

Return To GALAX NVIDIA GeForce GTX 960 2GB Upgrade GpuTest Redo System Information

microcode: microcode updated early to revision 0xa4, date = 2010-10-02
Linux version 4.7.9-200.fc24.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 6.2.1 20160916 (Red Hat 6.2.1-2) (GCC) ) #1 SMP Thu Oct 20 14:26:16 UTC 2016
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P35-DS3L/P35-DS3L, BIOS F8f 03/27/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CDFFF write-protect
  CE000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 0D0000000 mask FF0000000 uncachable
  3 base 100000000 mask F00000000 write-back
  4 base 1C0000000 mask FC0000000 uncachable
  5 base 1B0000000 mask FF0000000 uncachable
  6 base 0CFF00000 mask FFFF00000 uncachable
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f51a0-0x000f51af] mapped at [ffff8800000f51a0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x0f057000, 0x0f057fff] PGTABLE
BRK [0x0f058000, 0x0f058fff] PGTABLE
BRK [0x0f059000, 0x0f059fff] PGTABLE
BRK [0x0f05a000, 0x0f05afff] PGTABLE
BRK [0x0f05b000, 0x0f05bfff] PGTABLE
BRK [0x0f05c000, 0x0f05cfff] PGTABLE
RAMDISK: [mem 0x35cd4000-0x36e61fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B70 000014 (v00 GBT   )
ACPI: RSDT 0x00000000CFEE3040 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFEE3180 004B25 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000CFEE0000 000040
ACPI: HPET 0x00000000CFEE7E00 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFEE7E80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 0x00000000CFEE7D00 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CFEE7F00 00019E (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
ACPI: SSDT 0x00000000CFEE8390 000324 (v01 PmRef  CpuPm    00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
NODE_DATA(0) allocated [mem 0x1affe5000-0x1afffbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x00000001afffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000cfedffff]
  node   0: [mem 0x0000000100000000-0x00000001afffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001afffffff]
On node 0 totalpages: 1572477
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13244 pages used for memmap
  DMA32 zone: 847584 pages, LIFO batch:31
  Normal zone: 11264 pages used for memmap
  Normal zone: 720896 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff8801afc00000 s103512 r8192 d31656 u524288
pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1547884
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 6089820K/6289908K available (8133K kernel code, 1298K rwdata, 3284K rodata, 1584K init, 1516K bss, 200088K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:65792 nr_irqs:456 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2000.049 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.09 BogoMIPS (lpj=2000049)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 3 ACPI AML tables successfully acquired and loaded

Security Framework initialized
Yama: becoming mindful.
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff8eed2000 - ffffffff8eeda000)
ftrace: allocating 30296 entries in 119 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7999.81 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 21:55:50, date: 11/03/16
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801A83CBD80 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xe100-0xe11f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xe200-0xe21f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xe000-0xe01f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfa004000-0xfa0043ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfa000000-0xfa003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xe300-0xe31f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xe400-0xe41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xe500-0xe51f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfa005000-0xfa0053ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2923] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xe600-0xe607]
pci 0000:00:1f.2: reg 0x14: [io  0xe700-0xe703]
pci 0000:00:1f.2: reg 0x18: [io  0xe800-0xe807]
pci 0000:00:1f.2: reg 0x1c: [io  0xe900-0xe903]
pci 0000:00:1f.2: reg 0x20: [io  0xea00-0xea1f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfa006000-0xfa0067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa007000-0xfa0070ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xb000-0xb07f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf6000000-0xf6003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf6ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:03:00.0: [197b:2368] type 00 class 0x010185
pci 0000:03:00.0: reg 0x10: [io  0xc000-0xc007]
pci 0000:03:00.0: reg 0x14: [io  0xc100-0xc103]
pci 0000:03:00.0: reg 0x18: [io  0xc200-0xc207]
pci 0000:03:00.0: reg 0x1c: [io  0xc300-0xc303]
pci 0000:03:00.0: reg 0x20: [io  0xc400-0xc40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf7ffffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf9000000-0xf9000fff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x0800-0x087f] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: [io  0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 3]
pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:04: [io  0x0400-0x04bf] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000d2000-0x000d3fff] has been reserved
system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:06: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x00100000-0xcfedffff] could not be reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
system 00:06: [mem 0x000e0000-0x000effff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa100000-0xfa2fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa300000-0xfa4fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xfa500000-0xfa6fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa700000-0xfa8fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf507ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf6ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.0:   bridge window [mem 0xfa100000-0xfa2fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfa300000-0xfa4fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf7ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xfa500000-0xfa6fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xfa700000-0xfa8fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0:   bridge window [io  0x9000-0x9fff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xfa100000-0xfa2fffff]
pci_bus 0000:02: resource 2 [mem 0xfa300000-0xfa4fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf7ffffff]
pci_bus 0000:03: resource 2 [mem 0xfa500000-0xfa6fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa700000-0xfa8fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17976K (ffff880035cd4000 - ffff880036e62000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbee0000-0xcfee0000] (64MB) mapped at [ffff8800cbee0000-ffff8800cfedffff]
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1478210150.539:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=34 max_order=21 bucket_order=0
zbud: loaded
Key type big_key registered
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfa006000 port 0xfa006100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfa006000 port 0xfa006180 irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfa006000 port 0xfa006300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfa006000 port 0xfa006380 irq 28
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfa004000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.7.9-200.fc24.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfa005000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.7.9-200.fc24.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.7.9-200.fc24.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.7.9-200.fc24.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.7.9-200.fc24.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.7.9-200.fc24.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.7.9-200.fc24.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.7.9-200.fc24.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa4
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa4
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: 524856c1f36ea39c1a9d148e603b64bc265d0af2'
zswap: loaded using pool lzo/zbud
  Magic number: 8:375:954
memory memory7: hash matches
rtc_cmos 00:01: setting system clock to 2016-11-03 21:55:50 UTC (1478210150)
PM: Hibernation image not present or could not be loaded.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 976771055, native 976773168
ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-1: new full-speed USB device number 2 using uhci_hcd
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 3-1: New USB device found, idVendor=0ccd, idProduct=0077
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB PnP Sound Device          
usb 3-1: Manufacturer: C-Media Electronics Inc.      
usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
usb 1-3: Manufacturer: GenesysLogic
input: C-Media Electronics Inc.       USB PnP Sound Device           as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.3/0003:0CCD:0077.0001/input/input5
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
hid-generic 0003:0CCD:0077.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device          ] on usb-0000:00:1a.0-1/input3
tsc: Refined TSC clocksource calibration: 1999.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85afc727, max_idle_ns: 881590685098 ns
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: HPA detected: current 3907027055, native 3907029168
ata2.00: ATA-9: ST2000DM001-1ER164, CC25, max UDMA/133
ata2.00: 3907027055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST2000DM001-1ER1 CC25 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 3907027055 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-3.3: new low-speed USB device number 4 using ehci-pci
usb 1-3.3: New USB device found, idVendor=046d, idProduct=c505
usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.3: Product: USB Receiver
usb 1-3.3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.0/0003:046D:C505.0002/input/input6
hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-3.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.3/1-3.3:1.1/0003:046D:C505.0003/input/input7
hid-generic 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-3.3/input1
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1584K (ffffffff8ed46000 - ffffffff8eed2000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 44K (ffff88000e7f5000 - ffff88000e800000)
Freeing unused kernel memory: 812K (ffff88000eb35000 - ffff88000ec00000)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Create list of required static device nodes for the current kernel.
audit: type=1130 audit(1478210152.246:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1478210152.252:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1478210152.277:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1478210152.335:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
clocksource: Switched to clocksource tsc
audit: type=1130 audit(1478210152.405:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478210152.416:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478210152.454:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478210152.469:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478210152.571:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
scsi host6: pata_jmicron
scsi host7: pata_jmicron
ata7: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 19
ata8: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xffffc90000e54000, 00:1d:7d:a4:2f:7a, XID 18000000 IRQ 29
r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
r8169 0000:04:00.0 enp4s0: renamed from eth0
random: nonblocking pool is initialized
raid6: sse2x1   gen()  3253 MB/s
raid6: sse2x1   xor()  3398 MB/s
raid6: sse2x2   gen()  3476 MB/s
raid6: sse2x2   xor()  4144 MB/s
raid6: sse2x4   gen()  5875 MB/s
raid6: sse2x4   xor()  4619 MB/s
raid6: using algorithm sse2x4 gen() 5875 MB/s
raid6: .... xor() 4619 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse:  7908.000 MB/sec
   generic_sse:  7040.000 MB/sec
xor: using function: prefetch64-sse (7908.000 MB/sec)
usb 1-3.4: new low-speed USB device number 5 using ehci-pci
Btrfs loaded, crc32c=crc32c-generic
BTRFS: selftest: sectorsize: 4096  nodesize: 4096
BTRFS: selftest: sectorsize: 4096  nodesize: 8192
BTRFS: selftest: sectorsize: 4096  nodesize: 16384
BTRFS: selftest: sectorsize: 4096  nodesize: 32768
BTRFS: selftest: sectorsize: 4096  nodesize: 65536
BTRFS: device label fedora.sangria devid 2 transid 1817542 /dev/sdb
BTRFS: device label fedora.sangria devid 3 transid 1817542 /dev/sdc
usb 1-3.4: New USB device found, idVendor=046d, idProduct=c50e
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.4: Product: USB Receiver
usb 1-3.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.4/1-3.4:1.0/0003:046D:C50E.0004/input/input8
BTRFS: device label fedora.sangria devid 1 transid 1817542 /dev/sda1
hid-generic 0003:046D:C50E.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-3.4/input0
BTRFS info (device sda1): disk space caching is enabled
systemd-journald[158]: Received SIGTERM from PID 1 (systemd).
audit_printk_skb: 87 callbacks suppressed
audit: type=1404 audit(1478210156.316:40): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 32768 avtab hash slots, 107283 rules.
SELinux: 32768 avtab hash slots, 107283 rules.
SELinux:  8 users, 14 roles, 5063 types, 306 bools, 1 sens, 1024 cats
SELinux:  94 classes, 107283 rules
SELinux:  Permission validate_trans in class security not defined in policy.
SELinux:  Permission module_load in class system not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
audit: type=1403 audit(1478210156.569:41): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 256.622ms.
systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
systemd[1]: Relabelled /dev and /run in 40.404ms.
audit: type=1130 audit(1478224558.577:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1478224558.577:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224558.578:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1478224558.578:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224558.579:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1478224558.579:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224558.776:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1478224558.776:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
BTRFS info (device sda1): disk space caching is enabled
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
audit_printk_skb: 30 callbacks suppressed
audit: type=1130 audit(1478224561.354:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D2:    inputs:
snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  367.57  Mon Oct  3 20:37:01 PDT 2016
gpio_ich: GPIO from 451 to 511 on gpio_ich
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  367.57  Mon Oct  3 20:32:57 PDT 2016
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
usbcore: registered new interface driver snd-usb-audio
ppdev: user-space parallel port driver
Adding 4193276k swap on /dev/sda2.  Priority:-1 extents:1 across:4193276k FS
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
audit: type=1130 audit(1478224563.321:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224563.517:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1478224563.517:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224563.852:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[435]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1478224563.899:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224563.909:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1478224563.910:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224564.083:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224564.211:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit_printk_skb: 6 callbacks suppressed
audit: type=1130 audit(1478224566.808:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1478224567.289:73): auid=4294967295 ses=4294967295 subj=system_u:system_r:unconfined_service_t:s0 op="add_rule" key=(null) list=1 res=1
audit: type=1130 audit(1478224567.291:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1127 audit(1478224567.365:75): pid=623 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1478224567.378:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1478224567.426:77): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
audit: type=1305 audit(1478224567.426:78): audit_pid=606 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
it87: Found IT8718F chip at 0x290, revision 4
it87: Beeping is supported
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
fuse init (API version 7.25)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nvidia-modeset: Allocated GPU:0 (GPU-a91a7cb2-c4a4-75b5-5f00-0058dd339adb) @ PCI:0000:01:00.0
perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3152 > 3148), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3953 > 3940), lowering kernel.perf_event_max_sample_rate to 50000
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
perf: interrupt took too long (4949 > 4941), lowering kernel.perf_event_max_sample_rate to 40000
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device Dell P1690 (DVI-I-0)
apitest[24302]: segfault at 40918 ip 00007f020f20d8cc sp 00007ffec3350660 error 4 in libnvidia-glcore.so.367.57[7f020e20c000+175a000]
apitest[24343]: segfault at 40918 ip 00007f9d4e4768cc sp 00007fff144e4e90 error 4 in libnvidia-glcore.so.367.57[7f9d4d475000+175a000]
apitest[24354]: segfault at 40918 ip 00007fbbb17898cc sp 00007ffe53abdba0 error 4 in libnvidia-glcore.so.367.57[7fbbb0788000+175a000]
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.485 msecs
perf: interrupt took too long (16461 > 6186), lowering kernel.perf_event_max_sample_rate to 12000

Return To GALAX NVIDIA GeForce GTX 960 2GB Upgrade GpuTest Redo System Information